dmesg - AMD Ryzen 5 3500U - AMD Picasso 2GB - HP 8615 v46.30
Linux version 5.8.0-54-generic (buildd@lgw01-amd64-022) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #61~20.04.1-Ubuntu SMP Thu May 13 00:05:49 UTC 2021 (Ubuntu 5.8.0-54.61~20.04.1-generic 5.8.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009ecffff] usable
BIOS-e820: [mem 0x0000000009ed0000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
BIOS-e820: [mem 0x000000000a20b000-0x00000000da414fff] usable
BIOS-e820: [mem 0x00000000da415000-0x00000000da53cfff] reserved
BIOS-e820: [mem 0x00000000da53d000-0x00000000da57efff] ACPI data
BIOS-e820: [mem 0x00000000da57f000-0x00000000dab16fff] ACPI NVS
BIOS-e820: [mem 0x00000000dab17000-0x00000000ddc0bfff] reserved
BIOS-e820: [mem 0x00000000ddc0c000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
BIOS-e820: [mem 0x000000019f000000-0x000000021effffff] reserved
BIOS-e820: [mem 0x000000021f000000-0x000000021f33ffff] usable
BIOS-e820: [mem 0x000000021f340000-0x000000021fffffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xd74cd018-0xd74db057] usable ==> usable
e820: update [mem 0xd74cd018-0xd74db057] usable ==> usable
e820: update [mem 0xd74bf018-0xd74cc457] usable ==> usable
e820: update [mem 0xd74bf018-0xd74cc457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009ecffff] usable
reserve setup_data: [mem 0x0000000009ed0000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
reserve setup_data: [mem 0x000000000a20b000-0x00000000d74bf017] usable
reserve setup_data: [mem 0x00000000d74bf018-0x00000000d74cc457] usable
reserve setup_data: [mem 0x00000000d74cc458-0x00000000d74cd017] usable
reserve setup_data: [mem 0x00000000d74cd018-0x00000000d74db057] usable
reserve setup_data: [mem 0x00000000d74db058-0x00000000da414fff] usable
reserve setup_data: [mem 0x00000000da415000-0x00000000da53cfff] reserved
reserve setup_data: [mem 0x00000000da53d000-0x00000000da57efff] ACPI data
reserve setup_data: [mem 0x00000000da57f000-0x00000000dab16fff] ACPI NVS
reserve setup_data: [mem 0x00000000dab17000-0x00000000ddc0bfff] reserved
reserve setup_data: [mem 0x00000000ddc0c000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000fdffffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000019effffff] usable
reserve setup_data: [mem 0x000000019f000000-0x000000021effffff] reserved
reserve setup_data: [mem 0x000000021f000000-0x000000021f33ffff] usable
reserve setup_data: [mem 0x000000021f340000-0x000000021fffffff] reserved
efi: EFI v2.70 by American Megatrends
efi: TPMFinalLog=0xdaace000 ACPI 2.0=0xda552000 ACPI=0xda552000 SMBIOS=0xdda3f000 SMBIOS 3.0=0xdda3e000 MEMATTR=0xd7590098 ESRT=0xd979cd98 RNG=0xdda59f18 TPMEventLog=0xd74dc018
efi: seeding entropy pool
random: fast init done
secureboot: Secure boot enabled
Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7
SMBIOS 3.2.1 present.
DMI: HP HP Pavilion/8615, BIOS F.45 06/30/2020
tsc: Fast TSC calibration using PIT
tsc: Detected 2096.155 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21f340 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000220000000 aka 8704M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DA552000 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000DA5520A8 0000D4 (v01 HPQOEM SLIC-MPC 01072009 HP 00010013)
ACPI: FACP 0x00000000DA5661F8 000114 (v06 HPQOEM SLIC-MPC 01072009 HP 00010013)
ACPI: DSDT 0x00000000DA552210 013FE6 (v02 HPQOEM 8615 01072009 ACPI 20120913)
ACPI: FACS 0x00000000DAACDD80 000040
ACPI: APIC 0x00000000DA566310 0000DE (v03 HPQOEM 8615 01072009 HP 00010013)
ACPI: FPDT 0x00000000DA5663F0 000044 (v01 HPQOEM 8615 01072009 HP 00010013)
ACPI: FIDT 0x00000000DA566438 00009C (v01 HPQOEM 8615 01072009 HP 00010013)
ACPI: SSDT 0x00000000DA5664D8 005472 (v02 HPQOEM 8615 00000002 ACPI 02000002)
ACPI: MCFG 0x00000000DA56B950 00003C (v01 HPQOEM 8615 01072009 HP 00010013)
ACPI: MSDM 0x00000000DA56B990 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00010013)
ACPI: HPET 0x00000000DA56B9E8 000038 (v01 HPQOEM 8615 01072009 HP 00000005)
ACPI: UEFI 0x00000000DA56BA20 000042 (v01 HPQOEM 8615 00000002 HP 01000013)
ACPI: VFCT 0x00000000DA56BA68 00D484 (v01 HPQOEM 8615 00000001 HP 31504F47)
ACPI: SSDT 0x00000000DA578EF0 000050 (v01 HPQOEM 8615 00000001 ACPI 20120913)
ACPI: TPM2 0x00000000DA578F40 000038 (v04 HPQOEM 8615 00000001 HP 00000000)
ACPI: IVRS 0x00000000DA578F78 00013E (v02 HPQOEM 8615 00000001 HP 00000000)
ACPI: SSDT 0x00000000DA5790B8 00119C (v01 HPQOEM 8615 00000001 ACPI 00000001)
ACPI: CRAT 0x00000000DA57A258 000810 (v01 HPQOEM 8615 00000001 HP 00000001)
ACPI: CDIT 0x00000000DA57AA68 000029 (v01 HPQOEM 8615 00000001 HP 00000001)
ACPI: SSDT 0x00000000DA57AA98 000C33 (v01 HPQOEM 8615 00000001 ACPI 20120913)
ACPI: SSDT 0x00000000DA57B6D0 0010AC (v01 HPQOEM 8615 00000001 ACPI 20120913)
ACPI: SSDT 0x00000000DA57C780 001C69 (v01 HPQOEM 8615 00000001 ACPI 20120913)
ACPI: WSMT 0x00000000DA57E3F0 000028 (v01 HPQOEM 8615 01072009 HP 00010013)
ACPI: SSDT 0x00000000DA57E418 0002EA (v01 HPQOEM 8615 00000001 ACPI 20120913)
ACPI: BGRT 0x00000000DA57E708 000038 (v01 HPQOEM 8615 01072009 HP 00010013)
ACPI: Reserving FACP table memory at [mem 0xda5661f8-0xda56630b]
ACPI: Reserving DSDT table memory at [mem 0xda552210-0xda5661f5]
ACPI: Reserving FACS table memory at [mem 0xdaacdd80-0xdaacddbf]
ACPI: Reserving APIC table memory at [mem 0xda566310-0xda5663ed]
ACPI: Reserving FPDT table memory at [mem 0xda5663f0-0xda566433]
ACPI: Reserving FIDT table memory at [mem 0xda566438-0xda5664d3]
ACPI: Reserving SSDT table memory at [mem 0xda5664d8-0xda56b949]
ACPI: Reserving MCFG table memory at [mem 0xda56b950-0xda56b98b]
ACPI: Reserving MSDM table memory at [mem 0xda56b990-0xda56b9e4]
ACPI: Reserving HPET table memory at [mem 0xda56b9e8-0xda56ba1f]
ACPI: Reserving UEFI table memory at [mem 0xda56ba20-0xda56ba61]
ACPI: Reserving VFCT table memory at [mem 0xda56ba68-0xda578eeb]
ACPI: Reserving SSDT table memory at [mem 0xda578ef0-0xda578f3f]
ACPI: Reserving TPM2 table memory at [mem 0xda578f40-0xda578f77]
ACPI: Reserving IVRS table memory at [mem 0xda578f78-0xda5790b5]
ACPI: Reserving SSDT table memory at [mem 0xda5790b8-0xda57a253]
ACPI: Reserving CRAT table memory at [mem 0xda57a258-0xda57aa67]
ACPI: Reserving CDIT table memory at [mem 0xda57aa68-0xda57aa90]
ACPI: Reserving SSDT table memory at [mem 0xda57aa98-0xda57b6ca]
ACPI: Reserving SSDT table memory at [mem 0xda57b6d0-0xda57c77b]
ACPI: Reserving SSDT table memory at [mem 0xda57c780-0xda57e3e8]
ACPI: Reserving WSMT table memory at [mem 0xda57e3f0-0xda57e417]
ACPI: Reserving SSDT table memory at [mem 0xda57e418-0xda57e701]
ACPI: Reserving BGRT table memory at [mem 0xda57e708-0xda57e73f]
esrt: Reserving ESRT space from 0x00000000d979cd98 to 0x00000000d979cdd0.
e820: update [mem 0xd979c000-0xd979cfff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot enabled
RAMDISK: [mem 0x3782c000-0x3d484fff]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f33ffff]
NODE_DATA(0) allocated [mem 0x21f316000-0x21f33ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021f33ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009ecffff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20b000-0x00000000da414fff]
node 0: [mem 0x00000000ddc0c000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000019effffff]
node 0: [mem 0x000000021f000000-0x000000021f33ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff]
On node 0 totalpages: 1550765
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA zone: 28769 pages in unavailable ranges
DMA32 zone: 13980 pages used for memmap
DMA32 zone: 894670 pages, LIFO batch:63
DMA32 zone: 18738 pages in unavailable ranges
Normal zone: 10189 pages used for memmap
Normal zone: 652096 pages, LIFO batch:63
Normal zone: 36032 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xd7a73000-0xd7a86fff] usable ==> reserved
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09ed0000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
PM: hibernation: Registered nosave memory: [mem 0xd74bf000-0xd74bffff]
PM: hibernation: Registered nosave memory: [mem 0xd74cc000-0xd74ccfff]
PM: hibernation: Registered nosave memory: [mem 0xd74cd000-0xd74cdfff]
PM: hibernation: Registered nosave memory: [mem 0xd74db000-0xd74dbfff]
PM: hibernation: Registered nosave memory: [mem 0xd7a73000-0xd7a86fff]
PM: hibernation: Registered nosave memory: [mem 0xd979c000-0xd979cfff]
PM: hibernation: Registered nosave memory: [mem 0xda415000-0xda53cfff]
PM: hibernation: Registered nosave memory: [mem 0xda53d000-0xda57efff]
PM: hibernation: Registered nosave memory: [mem 0xda57f000-0xdab16fff]
PM: hibernation: Registered nosave memory: [mem 0xdab17000-0xddc0bfff]
PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfeb7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
PM: hibernation: Registered nosave memory: [mem 0x19f000000-0x21effffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 1526507
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 5824308K/6203060K available (14339K kernel code, 2537K rwdata, 5456K rodata, 2648K init, 4912K bss, 378752K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=1
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 46483 entries in 182 pages
ftrace: allocated 182 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
AMD-Vi: ivrs, add hid:PNPD0040, uid:, rdevid:152
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e37005745f, max_idle_ns: 440795263448 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.31 BogoMIPS (lpj=8384620)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx (family: 0x17, model: 0x18, stepping: 0x1)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 8 processors activated (33538.48 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
PM: Registering ACPI NVS region [mem 0xda57f000-0xdab16fff] (5865472 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 13:19:59, date: 2021-05-29
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
NET: Registered protocol family 16
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1622294398.152:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:01.6: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.6: enabling Extended Tags
pci 0000:00:01.6: PME# supported from D0 D3hot D3cold
pci 0000:00:01.7: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.7: enabling Extended Tags
pci 0000:00:01.7: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
pci 0000:01:00.0: [1c5c:1339] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfea00000-0xfea03fff 64bit]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: PME# supported from D0 D1 D3hot
pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:01.2 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
pci 0000:00:01.2: PCI bridge to [bus 01]
pci 0000:00:01.2: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:02:00.0: [10ec:c821] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfe900000-0xfe90ffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.6: PCI bridge to [bus 02]
pci 0000:00:01.6: bridge window [io 0xf000-0xffff]
pci 0000:00:01.6: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xfe804000-0xfe804fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.7: PCI bridge to [bus 03]
pci 0000:00:01.7: bridge window [io 0xe000-0xefff]
pci 0000:00:01.7: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:00.0: [1002:15d8] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:04:00.0: reg 0x24: [mem 0xfe700000-0xfe77ffff]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: BAR 0: assigned to efifb
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.1: [1002:15de] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xfe7c8000-0xfe7cbfff]
pci 0000:04:00.1: enabling Extended Tags
pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.2: [1022:15df] type 00 class 0x108000
pci 0000:04:00.2: reg 0x18: [mem 0xfe600000-0xfe6fffff]
pci 0000:04:00.2: reg 0x24: [mem 0xfe7ce000-0xfe7cffff]
pci 0000:04:00.2: enabling Extended Tags
pci 0000:04:00.3: [1022:15e0] type 00 class 0x0c0330
pci 0000:04:00.3: reg 0x10: [mem 0xfe500000-0xfe5fffff 64bit]
pci 0000:04:00.3: enabling Extended Tags
pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
pci 0000:04:00.4: [1022:15e1] type 00 class 0x0c0330
pci 0000:04:00.4: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
pci 0000:04:00.4: enabling Extended Tags
pci 0000:04:00.4: PME# supported from D0 D3hot D3cold
pci 0000:04:00.5: [1022:15e2] type 00 class 0x048000
pci 0000:04:00.5: reg 0x10: [mem 0xfe780000-0xfe7bffff]
pci 0000:04:00.5: enabling Extended Tags
pci 0000:04:00.5: PME# supported from D0 D3hot D3cold
pci 0000:04:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:04:00.6: reg 0x10: [mem 0xfe7c0000-0xfe7c7fff]
pci 0000:04:00.6: enabling Extended Tags
pci 0000:04:00.6: PME# supported from D0 D3hot D3cold
pci 0000:04:00.7: [1022:15e6] type 00 class 0x000000
pci 0000:04:00.7: reg 0x18: [mem 0xfe300000-0xfe3fffff]
pci 0000:04:00.7: reg 0x24: [mem 0xfe7cc000-0xfe7cdfff]
pci 0000:04:00.7: enabling Extended Tags
pci 0000:00:08.1: PCI bridge to [bus 04]
pci 0000:00:08.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe7fffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x3
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:04:00.0: vgaarb: bridge control possible
pci 0000:04:00.0: vgaarb: setting as boot device
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x09ed0000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd74bf018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd74cd018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd7a73000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd979c000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda415000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs ETD073d PNP0f13 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:01.2: PCI bridge to [bus 01]
pci 0000:00:01.2: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:01.6: PCI bridge to [bus 02]
pci 0000:00:01.6: bridge window [io 0xf000-0xffff]
pci 0000:00:01.6: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:01.7: PCI bridge to [bus 03]
pci 0000:00:01.7: bridge window [io 0xe000-0xefff]
pci 0000:00:01.7: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:08.1: PCI bridge to [bus 04]
pci 0000:00:08.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe7fffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfebfffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe7fffff]
pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
pci 0000:04:00.3: extending delay after power-on from D3hot to 20 msec
pci 0000:04:00.4: extending delay after power-on from D3hot to 20 msec
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 94564K
pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.2: Adding to iommu group 1
pci 0000:00:01.6: Adding to iommu group 2
pci 0000:00:01.7: Adding to iommu group 3
pci 0000:00:08.0: Adding to iommu group 4
pci 0000:00:08.1: Adding to iommu group 5
pci 0000:00:14.0: Adding to iommu group 6
pci 0000:00:14.3: Adding to iommu group 6
pci 0000:00:18.0: Adding to iommu group 7
pci 0000:00:18.1: Adding to iommu group 7
pci 0000:00:18.2: Adding to iommu group 7
pci 0000:00:18.3: Adding to iommu group 7
pci 0000:00:18.4: Adding to iommu group 7
pci 0000:00:18.5: Adding to iommu group 7
pci 0000:00:18.6: Adding to iommu group 7
pci 0000:00:18.7: Adding to iommu group 7
pci 0000:01:00.0: Adding to iommu group 8
pci 0000:02:00.0: Adding to iommu group 9
pci 0000:03:00.0: Adding to iommu group 10
pci 0000:04:00.0: Adding to iommu group 11
pci 0000:04:00.1: Adding to iommu group 12
pci 0000:04:00.2: Adding to iommu group 12
pci 0000:04:00.3: Adding to iommu group 12
pci 0000:04:00.4: Adding to iommu group 12
pci 0000:04:00.5: Adding to iommu group 12
pci 0000:04:00.6: Adding to iommu group 12
pci 0000:04:00.7: Adding to iommu group 12
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.2: PME: Signaling with IRQ 26
pcieport 0000:00:01.2: AER: enabled with IRQ 26
pcieport 0000:00:01.6: PME: Signaling with IRQ 27
pcieport 0000:00:01.6: AER: enabled with IRQ 27
pcieport 0000:00:01.7: PME: Signaling with IRQ 28
pcieport 0000:00:01.7: AER: enabled with IRQ 28
pcieport 0000:00:08.1: PME: Signaling with IRQ 29
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
ACPI: \_PR_.P000: Found 2 idle states
ACPI: \_PR_.P001: Found 2 idle states
ACPI: \_PR_.P002: Found 2 idle states
ACPI: \_PR_.P003: Found 2 idle states
ACPI: \_PR_.P004: Found 2 idle states
ACPI: \_PR_.P005: Found 2 idle states
ACPI: \_PR_.P006: Found 2 idle states
ACPI: \_PR_.P007: Found 2 idle states
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (65 C)
Linux agpgart interface v0.103
tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xda511000-0xda511fff flags 0x200] vs da511000 4000
tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xda515000-0xda515fff flags 0x200] vs da515000 4000
battery: ACPI: Battery Slot [BAT0] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2021-05-29T13:20:00 UTC (1622294400)
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x08108102
microcode: CPU1: patch_level=0x08108102
microcode: CPU2: patch_level=0x08108102
microcode: CPU3: patch_level=0x08108102
microcode: CPU4: patch_level=0x08108102
microcode: CPU5: patch_level=0x08108102
microcode: CPU6: patch_level=0x08108102
microcode: CPU7: patch_level=0x08108102
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1819364667, 413877)->(1825470980, -5692436)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a6aade17c93c37c23645b0615765b31b7274931d'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'ubuntu-mate Secure Boot Module Signature key: 3eaf61bf1b754142ea2a4caf6a4cac2c2a0337b7'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 5:822:332
tty tty53: hash matches
acpi_cpufreq: overriding BIOS provided _PSD data
RAS: Correctable Errors collector initialized.
Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2648K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 688K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.8.0-54-generic
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:02: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
r8168: loading out-of-tree module taints kernel.
xhci_hcd 0000:04:00.3: xHCI Host Controller
xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 1
xhci_hcd 0000:04:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.0-54-generic xhci-hcd
usb usb1: SerialNumber: 0000:04:00.3
i2c_amd_mp2 0000:04:00.7: enabling device (0000 -> 0002)
i2c_amd_mp2 0000:04:00.7: MP2 device registered.
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:04:00.3: xHCI Host Controller
xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 2
xhci_hcd 0000:04:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.0-54-generic xhci-hcd
usb usb2: SerialNumber: 0000:04:00.3
r8168 Gigabit Ethernet driver 8.048.00-NAPI loaded
r8168 0000:03:00.0: enabling device (0000 -> 0003)
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:04:00.4: xHCI Host Controller
xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.8.0-54-generic xhci-hcd
usb usb3: SerialNumber: 0000:04:00.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.4: xHCI Host Controller
xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 4
xhci_hcd 0000:04:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.8.0-54-generic xhci-hcd
usb usb4: SerialNumber: 0000:04:00.4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvme nvme0: pci function 0000:01:00.0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
nvme nvme0: missing or invalid SUBNQN field.
r8168 Copyright (C) 2019 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
nvme nvme0: 16/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4 p5 p6 p7
r8168 0000:03:00.0 eno1: renamed from eth0
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
[drm] amdgpu kernel modesetting enabled.
amdgpu: Topology: Add APU node [0x0:0x0]
checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
amdgpu 0000:04:00.0: vgaarb: deactivate vga console
amdgpu 0000:04:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x103C:0x8615 0xC2).
amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
tsc: Refined TSC clocksource calibration: 2096.060 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36a685b69, max_idle_ns: 440795255641 ns
clocksource: Switched to clocksource tsc
[drm] register mmio base: 0xFE700000
[drm] register mmio size: 524288
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
amdgpu: ATOM BIOS: 113-PICASSO-114
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:04:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
amdgpu 0000:04:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
amdgpu 0000:04:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=2048M
[drm] RAM width 64bits DDR4
[TTM] Zone kernel: Available graphics memory: 3030444 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
amdgpu: hwmgr_sw_init smu backed is smu10_smu
[drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[drm] PSP loading VCN firmware
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 1-4: new full-speed USB device number 2 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is not available
usb 3-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
[drm] kiq ring mec 2 pipe 1 q 0
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB: 400000 in kHz, 2874 in mV
[drm] DM_PPLIB: 933000 in kHz, 3224 in mV
[drm] DM_PPLIB: 1067000 in kHz, 3924 in mV
[drm] DM_PPLIB: 1200000 in kHz, 4074 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB: 300000 in kHz, 2874 in mV
[drm] DM_PPLIB: 600000 in kHz, 3224 in mV
[drm] DM_PPLIB: 626000 in kHz, 3924 in mV
[drm] DM_PPLIB: 654000 in kHz, 4074 in mV
[drm] Display Core initialized with v3.2.84!
irq 7: nobody cared (try booting with the "irqpoll" option)
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 5.8.0-54-generic #61~20.04.1-Ubuntu
Hardware name: HP HP Pavilion/8615, BIOS F.45 06/30/2020
Call Trace:
dump_stack+0x74/0x92
__report_bad_irq+0x3a/0xaf
note_interrupt.cold+0xb/0x60
handle_irq_event_percpu+0x73/0x80
handle_irq_event+0x3b/0x60
handle_fasteoi_irq+0x9c/0x150
asm_call_irq_on_stack+0x12/0x20
common_interrupt+0xc1/0x150
asm_common_interrupt+0x1e/0x40
RIP: 0010:cpuidle_enter_state+0xca/0x3e0
Code: ff e8 ba bb 7c ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 e4 02 00 00 31 ff e8 4d 09 83 ff fb 66 0f 1f 44 00 00 85 e4 0f 88 39 02 00 00 49 63 d4 4c 8b 7d d0 4c 2b 7d c8 48 8d
RSP: 0018:ffffa13e00157e38 EFLAGS: 00000246
RAX: ffff91a058aec740 RBX: ffff91a04504e800 RCX: 000000000000001f
RDX: 0000000000000000 RSI: 000000003d1123e9 RDI: 0000000000000000
RBP: ffffa13e00157e78 R08: 00000000b1273cf0 R09: 00000049adac4b8a
R10: ffff91a058aeb404 R11: ffff91a058aeb3e4 R12: 0000000000000002
R13: ffffffff9bf77dc0 R14: 0000000000000002 R15: ffff91a04504e800
? cpuidle_enter_state+0xa6/0x3e0
cpuidle_enter+0x2e/0x40
call_cpuidle+0x23/0x40
do_idle+0x1e7/0x280
cpu_startup_entry+0x20/0x30
start_secondary+0x159/0x1a0
secondary_startup_64+0xb6/0xc0
handlers:
[] amd_gpio_irq_handler
Disabling IRQ #7
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4d5f02)
psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x1a, 0x0d.
psmouse serio1: elantech: Elan sample query result 04, 4d, 86
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] VCN decode and encode initialized successfully(under DPG Mode).
kfd kfd: Allocated 3969056 bytes on gart
amdgpu: Topology: Add APU node [0x15d8:0x1002]
kfd kfd: added device 1002:15d8
amdgpu 0000:04:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8
[drm] fb mappable at 0x19FBCA000
[drm] vram apper at 0x19F000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:04:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:04:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
amdgpu 0000:04:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[drm] Initialized amdgpu 3.38.0 20150101 for 0000:04:00.0 on minor 0
usb 1-4: device descriptor read/64, error -71
usb 3-1.2: new high-speed USB device number 3 using xhci_hcd
raid6: avx2x4 gen() 15063 MB/s
raid6: avx2x4 xor() 3750 MB/s
usb 1-4: new full-speed USB device number 3 using xhci_hcd
usb 3-1.2: New USB device found, idVendor=04f2, idProduct=b627, bcdDevice=32.48
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.2: Product: HP Wide Vision HD Camera
usb 3-1.2: Manufacturer: Chicony
raid6: avx2x2 gen() 16473 MB/s
raid6: avx2x2 xor() 10221 MB/s
usb 1-4: device descriptor read/64, error -71
raid6: avx2x1 gen() 15033 MB/s
raid6: avx2x1 xor() 10185 MB/s
raid6: sse2x4 gen() 10121 MB/s
usb 1-4: device descriptor read/64, error -71
raid6: sse2x4 xor() 4119 MB/s
raid6: sse2x2 gen() 10234 MB/s
usb usb1-port4: attempt power cycle
raid6: sse2x2 xor() 6997 MB/s
raid6: sse2x1 gen() 8772 MB/s
raid6: sse2x1 xor() 5573 MB/s
raid6: using algorithm avx2x2 gen() 16473 MB/s
raid6: .... xor() 10221 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
Lockdown: resume: hibernation is restricted; see man kernel_lockdown.7
EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
usb 1-4: new full-speed USB device number 4 using xhci_hcd
usb 1-4: Device not responding to setup address.
systemd[1]: systemd 245.4-4ubuntu3.6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
usb 1-4: Device not responding to setup address.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started ntp-systemd-netif.path.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
lp: driver loaded but no devices found
systemd[1]: Starting Create System Users...
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1997...
systemd[1]: Mounting Mount unit for core18, revision 2066...
systemd[1]: Mounting Mount unit for snapd, revision 11588...
systemd[1]: Mounting Mount unit for snapd, revision 11841...
systemd[1]: Mounting Mount unit for software-boutique, revision 54...
systemd[1]: Mounting Mount unit for ubuntu-mate-welcome, revision 622...
systemd[1]: Mounting Mount unit for ubuntu-mate-welcome, revision 626...
systemd[1]: Started Journal Service.
usb 1-4: device not accepting address 4, error -71
systemd-journald[396]: Received client request to flush runtime journal.
usb 1-4: new full-speed USB device number 5 using xhci_hcd
usb 1-4: Device not responding to setup address.
input: HP Wireless hotkeys as /devices/virtual/input/input7
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits 3DC sensor found
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
usb 1-4: Device not responding to setup address.
snd_pci_acp3x 0000:04:00.5: enabling device (0000 -> 0002)
snd_pci_acp3x 0000:04:00.5: Invalid ACP audio mode : 1
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
ccp 0000:04:00.2: enabling device (0000 -> 0002)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
ccp 0000:04:00.2: ccp enabled
ccp 0000:04:00.2: psp: unable to access the device: you might be running a broken BIOS.
input: HP WMI hotkeys as /devices/virtual/input/input9
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
kvm: Nested Virtualization enabled
SVM: kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
rtl8821ce 0000:02:00.0: enabling device (0000 -> 0003)
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
usb 1-4: device not accepting address 5, error -71
usb usb1-port4: unable to enumerate USB device
rtl8821ce 0000:02:00.0 wlo1: renamed from wlan0
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
snd_hda_intel 0000:04:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:04:00.6: enabling device (0000 -> 0002)
snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input10
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input11
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input12
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
Adding 10000380k swap on /dev/nvme0n1p7. Priority:-2 extents:1 across:10000380k SSFS
EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1622294405.047:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=789 comm="apparmor_parser"
audit: type=1400 audit(1622294405.047:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=794 comm="apparmor_parser"
audit: type=1400 audit(1622294405.051:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=792 comm="apparmor_parser"
audit: type=1400 audit(1622294405.051:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=792 comm="apparmor_parser"
audit: type=1400 audit(1622294405.051:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=792 comm="apparmor_parser"
audit: type=1400 audit(1622294405.051:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=787 comm="apparmor_parser"
audit: type=1400 audit(1622294405.059:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=791 comm="apparmor_parser"
audit: type=1400 audit(1622294405.059:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=791 comm="apparmor_parser"
audit: type=1400 audit(1622294405.059:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=798 comm="apparmor_parser"
audit: type=1400 audit(1622294405.063:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=793 comm="apparmor_parser"
IPMI message handler: version 39.2
ipmi device interface
ipmi_si: IPMI System Interface driver
ipmi_si: Unable to find any System Interface(s)
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Wide Vision HD Camera (04f2:b627)
input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.2/3-1.2:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 1-4: new full-speed USB device number 6 using xhci_hcd
eno1: 0xffffa13e00161000, 80:e8:2c:29:51:2e, IRQ 40
usb 1-4: device descriptor read/64, error -71
fbcon: Taking over console
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 7 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
Console: switching to colour frame buffer device 240x67
Lockdown: Xorg: raw io port access is restricted; see man kernel_lockdown.7
usb 1-4: device descriptor read/64, error -71
[drm] Cannot allocate secure buffer since TMZ is disabled
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 8 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 8, error -71
usb 1-4: new full-speed USB device number 9 using xhci_hcd
usb 1-4: Device not responding to setup address.
r8168: eno1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
usb 1-4: Device not responding to setup address.
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
usb 1-4: device not accepting address 9, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 10 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 11 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 12 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 12, error -71
usb 1-4: new full-speed USB device number 13 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 13, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 14 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 15 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 16 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 16, error -71
usb 1-4: new full-speed USB device number 17 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 17, error -71
usb usb1-port4: unable to enumerate USB device
Lockdown: scanbd: raw io port access is restricted; see man kernel_lockdown.7
Lockdown: scanbd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
usb 1-4: new full-speed USB device number 18 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 19 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 20 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 20, error -71
usb 1-4: new full-speed USB device number 21 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 21, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 22 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 23 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 24 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 24, error -71
usb 1-4: new full-speed USB device number 25 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 25, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 26 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 27 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 28 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 28, error -71
usb 1-4: new full-speed USB device number 29 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 29, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 30 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 31 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 32 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 32, error -71
usb 1-4: new full-speed USB device number 33 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 33, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 34 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 35 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 36 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 36, error -71
usb 1-4: new full-speed USB device number 37 using xhci_hcd
usb 1-4: Device not responding to setup address.
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 37, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 38 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 39 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 40 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 40, error -71
usb 1-4: new full-speed USB device number 41 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 41, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 42 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 43 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 44 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 44, error -71
usb 1-4: new full-speed USB device number 45 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 45, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 46 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 47 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 48 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 48, error -71
usb 1-4: new full-speed USB device number 49 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 49, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 50 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 51 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 52 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 52, error -71
usb 1-4: new full-speed USB device number 53 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 53, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 54 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 55 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 56 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 56, error -71
usb 1-4: new full-speed USB device number 57 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 57, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 58 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 59 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 60 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 60, error -71
usb 1-4: new full-speed USB device number 61 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 61, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 62 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 63 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 64 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 64, error -71
usb 1-4: new full-speed USB device number 65 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 65, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 66 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 67 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 68 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 68, error -71
usb 1-4: new full-speed USB device number 69 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 69, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 70 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 71 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 72 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 72, error -71
usb 1-4: new full-speed USB device number 73 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 73, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 74 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 75 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 76 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 76, error -71
usb 1-4: new full-speed USB device number 77 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 77, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 78 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 79 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 80 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 80, error -71
usb 1-4: new full-speed USB device number 81 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 81, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 82 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 83 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 84 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 84, error -71
usb 1-4: new full-speed USB device number 85 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 85, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-3: new high-speed USB device number 86 using xhci_hcd
usb 1-3: New USB device found, idVendor=05ac, idProduct=12ab, bcdDevice= 5.03
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: iPad
usb 1-3: Manufacturer: Apple Inc.
usb 1-3: SerialNumber: f8250dbfe652759adae3ccb91b4dc309b9a4e7d0
usbcore: registered new device driver apple-mfi-fastcharge
ipheth 1-3:4.2: Apple iPhone USB Ethernet device attached
usbcore: registered new interface driver ipheth
ipheth 1-3:4.2 enx52323723f196: renamed from eth0
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
apple-mfi-fastcharge 1-3: USB disconnect, device number 86
ipheth 1-3:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-4: new full-speed USB device number 87 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 88 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 89 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 89, error -71
usb 1-4: new full-speed USB device number 90 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 90, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 91 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 92 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 93 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 93, error -71
usb 1-4: new full-speed USB device number 94 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 94, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 95 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 96 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 97 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 97, error -71
usb 1-4: new full-speed USB device number 98 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 98, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 99 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 100 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 101 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 101, error -71
usb 1-4: new full-speed USB device number 102 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 102, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 103 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 104 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 105 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 105, error -71
usb 1-4: new full-speed USB device number 106 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 106, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 107 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 108 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 109 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 109, error -71
usb 1-4: new full-speed USB device number 110 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 110, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 111 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 112 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 113 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 113, error -71
usb 1-4: new full-speed USB device number 114 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 114, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 115 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 116 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 117 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 117, error -71
usb 1-4: new full-speed USB device number 118 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 118, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 119 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 120 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 121 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 121, error -71
usb 1-4: new full-speed USB device number 122 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 122, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 123 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 124 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 125 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 125, error -71
usb 1-4: new full-speed USB device number 126 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 126, error -71
usb usb1-port4: unable to enumerate USB device
hp_wmi: Unknown event_id - 0 - 0x0
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
r8168: eno1: link down
r8168: eno1: link up
kauditd_printk_skb: 35 callbacks suppressed
audit: type=1400 audit(1622347202.341:47): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=27517 comm="cups-browsed" capability=23 capname="sys_nice"
audit: type=1400 audit(1622387235.169:48): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=44973 comm="apparmor_parser"
audit: type=1400 audit(1622387235.241:49): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=44979 comm="apparmor_parser"
audit: type=1400 audit(1622387235.241:50): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=44979 comm="apparmor_parser"
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
bpfilter: Loaded bpfilter_umh pid 45273
Started bpfilter
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: RRIP_1991A
usb 1-1: new high-speed USB device number 127 using xhci_hcd
usb 1-1: New USB device found, idVendor=13fe, idProduct=1e00, bcdDevice= 1.10
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Patriot Memory
usb 1-1: Manufacturer:
usb 1-1: SerialNumber: 077B05A6011A
usb 1-4: new full-speed USB device number 2 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 3 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 4 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 4, error -71
usb 1-4: new full-speed USB device number 5 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 5, error -71
usb usb1-port4: unable to enumerate USB device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-4: new full-speed USB device number 6 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 7 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
scsi 0:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 8 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 8, error -71
usb 1-4: new full-speed USB device number 9 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 9, error -71
usb usb1-port4: unable to enumerate USB device
sd 0:0:0:0: [sda] 8060928 512-byte logical blocks: (4.13 GB/3.84 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT4-fs (sda1): warning: checktime reached, running e2fsck is recommended
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
sda: sda1
usb 1-1: USB disconnect, device number 127
usb 1-4: new full-speed USB device number 10 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 11 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 12 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 12, error -71
usb 1-4: new full-speed USB device number 13 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 13, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 14 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 15 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 16 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 16, error -71
usb 1-4: new full-speed USB device number 17 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 17, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 18 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 19 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 20 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 20, error -71
usb 1-4: new full-speed USB device number 21 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 21, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 22 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 23 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 24 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 24, error -71
usb 1-4: new full-speed USB device number 25 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 25, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 26 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 27 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 28 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 28, error -71
usb 1-4: new full-speed USB device number 29 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 29, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 30 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 31 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 32 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 32, error -71
usb 1-4: new full-speed USB device number 33 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 33, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-1: new high-speed USB device number 34 using xhci_hcd
usb 1-1: New USB device found, idVendor=125f, idProduct=d07a, bcdDevice=11.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: A-DATA USB Flash Drive
usb 1-1: Manufacturer: A-DATA
usb 1-1: SerialNumber: AA60000000000110
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1:1.0
scsi 0:0:0:0: Direct-Access A-DATA USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
hfsplus: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
sda: sda3 sda4
usb 1-1: USB disconnect, device number 34
usb 1-4: new full-speed USB device number 35 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 36 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 37 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 37, error -71
usb 1-4: new full-speed USB device number 38 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 38, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 39 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 40 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 41 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 41, error -71
usb 1-4: new full-speed USB device number 42 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 42, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 43 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 44 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 45 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 45, error -71
usb 1-4: new full-speed USB device number 46 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 46, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 47 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 48 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 49 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 49, error -71
usb 1-4: new full-speed USB device number 50 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 50, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 51 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 52 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 53 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 53, error -71
usb 1-4: new full-speed USB device number 54 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 54, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 55 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 56 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 57 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 57, error -71
usb 1-4: new full-speed USB device number 58 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 58, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 59 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 60 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 61 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 61, error -71
usb 1-4: new full-speed USB device number 62 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 62, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 63 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 64 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 65 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 65, error -71
usb 1-4: new full-speed USB device number 66 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 66, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 67 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 68 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 69 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 69, error -71
usb 1-4: new full-speed USB device number 70 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 70, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-1: new high-speed USB device number 71 using xhci_hcd
usb 1-1: New USB device found, idVendor=125f, idProduct=d07a, bcdDevice=11.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: A-DATA USB Flash Drive
usb 1-1: Manufacturer: A-DATA
usb 1-1: SerialNumber: AA60000000000110
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1:1.0
usb 1-4: new full-speed USB device number 72 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 73 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
scsi 0:0:0:0: Direct-Access A-DATA USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 74 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 74, error -71
usb 1-4: new full-speed USB device number 75 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 75, error -71
usb usb1-port4: unable to enumerate USB device
hfsplus: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1: USB disconnect, device number 71
usb 1-4: new full-speed USB device number 76 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 77 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 78 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 78, error -71
usb 1-4: new full-speed USB device number 79 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 79, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 80 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 81 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 82 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 82, error -71
usb 1-4: new full-speed USB device number 83 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 83, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 84 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 85 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 86 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 86, error -71
usb 1-4: new full-speed USB device number 87 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 87, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 88 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 89 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 90 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 90, error -71
usb 1-4: new full-speed USB device number 91 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 91, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 92 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 93 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 94 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 94, error -71
usb 1-4: new full-speed USB device number 95 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 95, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 96 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 97 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 98 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 98, error -71
usb 1-4: new full-speed USB device number 99 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 99, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 100 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 101 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 102 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 102, error -71
usb 1-4: new full-speed USB device number 103 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 103, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 104 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 105 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 106 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 106, error -71
usb 1-4: new full-speed USB device number 107 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 107, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 108 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 109 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 110 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 110, error -71
usb 1-4: new full-speed USB device number 111 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 111, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-4: new full-speed USB device number 112 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 113 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 114 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 114, error -71
usb 1-4: new full-speed USB device number 115 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 115, error -71
usb usb1-port4: unable to enumerate USB device
usb 1-1: new high-speed USB device number 116 using xhci_hcd
usb 1-1: New USB device found, idVendor=125f, idProduct=d07a, bcdDevice=11.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: A-DATA USB Flash Drive
usb 1-1: Manufacturer: A-DATA
usb 1-1: SerialNumber: AA60000000000110
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1:1.0
usb 1-4: new full-speed USB device number 117 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
usb 1-4: device descriptor read/64, error -71
usb 1-4: new full-speed USB device number 118 using xhci_hcd
usb 1-4: device descriptor read/64, error -71
scsi 0:0:0:0: Direct-Access A-DATA USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb 1-4: device descriptor read/64, error -71
usb usb1-port4: attempt power cycle
usb 1-4: new full-speed USB device number 119 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 119, error -71
usb 1-4: new full-speed USB device number 120 using xhci_hcd
usb 1-4: Device not responding to setup address.
usb 1-4: Device not responding to setup address.
usb 1-4: device not accepting address 120, error -71
usb usb1-port4: unable to enumerate USB device
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
hfsplus: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
Adding 10000380k swap on /dev/nvme0n1p7. Priority:-2 extents:1 across:10000380k SSFS
audit: type=1400 audit(1622502916.293:51): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/12057/usr/lib/snapd/snap-confine" pid=93978 comm="apparmor_parser"
audit: type=1400 audit(1622502916.293:52): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/12057/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=93978 comm="apparmor_parser"
audit: type=1400 audit(1622502917.981:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/12057/usr/lib/snapd/snap-confine" pid=94063 comm="apparmor_parser"
audit: type=1400 audit(1622502918.001:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/12057/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=94063 comm="apparmor_parser"
audit: type=1400 audit(1622502918.005:55): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.software-boutique" pid=94065 comm="apparmor_parser"
audit: type=1400 audit(1622502918.005:56): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.ubuntu-mate-welcome" pid=94067 comm="apparmor_parser"
audit: type=1400 audit(1622502918.005:57): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.post-refresh" pid=94069 comm="apparmor_parser"
audit: type=1400 audit(1622502918.009:58): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.install" pid=94068 comm="apparmor_parser"
audit: type=1400 audit(1622502918.009:59): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.remove" pid=94070 comm="apparmor_parser"
audit: type=1400 audit(1622502918.009:60): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ubuntu-mate-welcome.ubuntu-mate-welcome" pid=94072 comm="apparmor_parser"
sda: sda3 sda4
sda: sda3 sda4
sda: sda3 sda4
kauditd_printk_skb: 2 callbacks suppressed
audit: type=1400 audit(1622520002.320:63): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=102305 comm="cups-browsed" capability=23 capname="sys_nice"